I will d/l and try, thought I might have to buy new printer, if it works, which I'm sure it will, I will love you forever. I have a 1210.

thanks a lot man!

I have just installed this driver for my HP PSC Photosmart 2410, and it works a treat. The olny couple of things that seem to be missing are the Service utilities such as ink amounts etc. And the option for duplex unit attached (Automatic 2 sided printing) is this something anyone has managed to get working? i want need my device to be 100% functional before i do the full swich to x64. Please keep me posted and thanks for your hard work!!

Any Updates?

Has this driver been tested on Windows Server 2003 x64? I get errors durring the installation for my HP Officejet 7410...

I think it's because the setup is trying to create a System Restore point, and there is no system restore in Srv2003.

I doubt that's the case, because I always have System Restore disabled on my machines and got no error during installation. And XP x64 is based off of Server 2003 SP1 anyway, so it should work.

Is their an Xp 64 bit driver for the HP PSC 1350 yet? If so, link to download?

No, I'm quite clear in saying that it doesn't work. In fact, if I run one of the setup exe's manually, it says that I'm running Windows Server 2003 x64 Edition, and not the required Windows XP Pro x64 edition.

I got the driver to manually install to print, but I'd love to be able to scan .

Well, like I always say, everything works in theory until it doesn't. :)

I just "assumed" it would work, but apparently it doesn't, heh.

Please delete the following 2 lines from section [Run3] from the autorun.inf that is at the root.

13=%system32%\net stop stisvc
14=%system32%\net start stisvc

X-MAN

People still having scanning problems? If can you please post date and version of a file called hpxpaio.dll that is in c:\windows\system32?

I might have a patch for it.

Please send me or post the ZIP file resulting from runnin \setup\hpzrcv01.exe from the downloaded driver. Run msinfo32.exe and save the results as .NFO file and send it along with the zip file. That should help diagnose the problem.

HI,
Please read post #288 for where to get the drivers from.
Regarding the HP Director, it has nothing to do with wireless. Even more it won't work on x64.

If your printer doesn't connect to your wireless network use this check list:

[] Reset the printer to manufacturing defaults
[] Make sure the printer has the radio turned on (blue light is on)
[] Check that Mac address control (a.k.a Mac filtering) is off in your access point or gateway.
[] Enable SID broadcast in your access point or gateway.
[] Disable any encription
[] Enable DHCP in the access point

With all this the printer should "see" your wireless network and get an IP address. Print the network configuration page to check the values.

Good luck.
X-MAN

If you have a hp psc 1210 this driver should work.


See the post about deleting the following 2 lines from section [Run3] in the autorun.inf that is at the root.

13=%system32%\net stop stisvc
14=%system32%\net start stisvc

X-MAN

I never tested this driver on Windows Server 2003 x64 and that is why I blocked the install in this version. If you want to go at your own risk run hpzsetup.exe and when you get blocked because of the OS do: hold Ctrl+Shift keys and click on Cancel. The installation should continue and then you are on your own.

I just hope you are not opreating a comercial x64 server that anybody needs to rely on because you'll be playing with fire and I don't want this liability

Same comment as Jito463. It all just "in theory"!

X-MAN

How would you manually install the scanning stuff? Also, when I manually installed the printer driver, I don't see any support for the Duplexer or Second Paper Tray in my printer. Is support comming soon? :)

If the printer is connected USB just plug it in and when asked for drivers point to where you expanded the download.

If it is network you can only use the installer.

BTW, did my workaround work?

I don't even get to OS Detection in the installer.

When the installer is up to step 1/4 (Checking System), I get a popup error dialog that has this:



If I click okay, the installer starts analyzing error logs. If I click the "Details..." button, I get this:



If I click continue, setup closes.

I was able to get to the OS Detection by just starting exe's manually (playing around ).

The printer is connected via WiFi. Do you think we can get this to work? I might be able to plug this thing into usb, but it's really not preferred (I'll need to go out and purchase some stuff, and I'll also won't be able to use this as a network scanner).

I started playing around with what I think is the setup script file (x64ins02.dat in C:\WINDOWS). What I did was, comment out line 275:



And I got much further in setup. By then I realized that I needed to enable the Windows Service called "Windows Image Acquisition (WIA)", so I went into services.msc and changed it's startup type to "automattic". Setup then errored on a "net stop stisvc" command - stisvc IS the WIA service, so I went back into the setup and found and commented out the net stop / net start stisvc lines (298-299):



Setup completes sucessfully, and I just went into cmd and manually restarted WIA.

I'm testing scanning and printing now

Edit: Printing works, scanning doesn't. The scanner shows up with WIA, but it always errors when I try to scan. I am going to try rebooting now.

Has anyone seen or heard of any workaround or driver for HP Scanjets yet.
as far as I knew drivers were not available, then I found an article postewd on microsofts webpage with a "hotfix" for 4 of the models running on x64 pro and 2003 server 64 bit. ??

Hi,

You have to install this patch too.

Make sure you power cycle the all-in-one (unplug the power cord and plug it back in; off and on is not a real power cycle) before you install the patch.

INstall the patch, restart WIA and try again. If it still fails try to capture the error message.


BTW, I am interested in knowing why it failed with invalid parameter. Would you mind to cmd to the \setup\ forlder and run

start /wait hpzshl40.exe -m icepreshield,delayedreboot -log 2047

It will take some time but when it is finished could you send me the log file? It will be in the %TEMP% folder and its namewill be hpzshlXXX.log XXX will be a number like 004. The file should be the biggest with the highest number.

X-MAN.

How do i remove this driver?

I have a deskjet 5740, and I'm having problems when trying to print (firefox complains, acrobat crashes, open office crashes). So i just want to revert to the 990c drivers that hp suggests.

I went through the uninstall (several times), and it always says that there are no supported devices, but there are still files that need to be removed. So I allow it to continue, so far so good. But when I go to re-install my printer, it automatically detects it as a deskjet 5700, and asks me where the inf/driver is (screenshot attached). I don't get the "pick a manufacter" list, just the standard "file needed" box, with a browse/ok/cancel buttons.

Click to view attachment

Hello,

where an earth do I download these drivers from??? THere is no link to download it please help!

Check out HERE. It is also buried back in this thread.

Yes,

I installed the latest version and it's the same blinking button for me. And the control toolbox does not work as well. (I can do without it for now though).
My installation wasn't completed at the end and asked me to reinstall drivers. I didn't but the printer prints just fine. Did it happen to you too?

I just clicked on the link, but it seems like he's / she's death


error:

Board Message

Sorry, an error occurred. If you are unsure on how to use a feature, or don't know why you got this error message, try looking through the help files for more information.

What's going on?

Wander

Hi,

Thanks a lot for the drivers, they worked like a charm for both my psc 1350 and my deskjet 3500, the only problem I have with the psc is that when I print pics they come out too dark, before I was able to fix this under "Service this device", I don't remember the exact process but that's where you print out a page and scan it, anyways when I click the "Service this device" button I get the following error:

"A required printer file is either missing or corrupted. Reinstall the HP printing software that came with this device and try again."

Is this an issue with the beta drivers or is it a problem with my setup?

Can you adjust the darkness in the printer preferences? Should be a control to print them lighter; save it as default.

The missing file is probably because of the beta drivers not your setup.

[FONT=Times]

QUOTE(xrigau @ May 12 2005, 06:55 PM)

The file is attached because I could not find a better place to put it. Please use this topic to talk about the driver.

[size=7]Edit-  Latest version and news in My UPDATE post


----------------------------------------------------------------------------------------------
This driver IS NOT SUPPORTED BY HP in any way,  form or fashion. This driver is in a PRE-BETA state and it is delivered 'as is'. HP will not assume any responsibility about what might happen to your PC. This driver has not passed WHQL tests so plug and play is fairly slow and you will have to click on some Windows warnings to continue the install.
You are on your own. You might get "voluntary" help in Planet AMD64 > Forum Home > Software > Drivers (http://www.planetamd64.com/index.php?showforum=14)

CAUTION If you ever call HP support about this driver your 64 bit processor will overclock itself until it burns!
If you are not familiar with what an INF file is or device manager please stay away from this driver, no offense intended.
In the Found New Hardware Wizard do:
1) Select "No,  not this time"
2) "Install the software automatically (Recommended)
3) Click "Continue anyway" on the Scary Windows screen.
4) Finally click "Finish"

hp deskjet series: 3320, 3420, 3500, 3600, 3740, 3840, 5100, 5550, 5551, 5600, 5700, 5800, 6122, 6127, 630c, 640c, 6500, 656c, 6600, 6800, 816c, 825c, 840c, 845c, 895c, 920c, 930c, 940c, 950c, 955c, 957c, 960c, 970c, 980c, 990c, 995c
hp officejet series: 4100, 4105, 4200, 5500, 6100, 6200, 7200, 7300, 7400
hp photosmart series: 140, 240, 2600, 2700, 320, 370, 7200, 7400, 7600, 7700, 7900, 8100, 8400, 8700
hp psc series: 1000, 1100, 1200, 1300, 1310, 1600, 2100, 2150, 2170, 2200, 2300, 2350, 2400, 2500

The biggest limitation will be in the printer driver because all models will look the same.

Examples: You might have a DeskJet without a feature, say borderless printing, and the printer preferences will let you select the borderless printing option even if your product doesn't have it. Some 4x6" photosmart printers will appear like they are letter size printers. Obviously any printer configuration that requires the hardware to do something it cannot perform will result in some side effects for that print job; failure, clipping, duplicate pages, no output, etc.

Any chance of a color laserjet 2840 AIO driver in the near future. I called HP and even though this is one of their "Brandy New" models there is no date or info on X64 drivers. What a waste, even Xerox has x64 drivers, seems HP doesn't want our business.

Any chance of HP Color Laserjet 2840 AIO in the near future. I called HP and even though this is one of the "BRANDY NEW" models they have no X64 drivers and no info on when available. Any help appreciated. Seems as if HP doesn't want any of our business, Even Xerox has x64 drivers and they publish them.

Oh man... This is an incredible piece of work. Thank you so much.

You may need to upload these again or host them somewhere else.
The download dies at 21.05mb's every time with both IE and Firefox.

Can't download the file, says it is missing!!!!

I need it please!!!

YA unofficial drivers!!!!

Maintenance release -bug fixes- of GoesTo64 Build 12 Release Notes (5.64.0.12)

<edit>The release are r in PlanetAMD64 > Downloads > Miscellaneous ODD area and named HP 5.64.0.12 (n/3) Inkjet printers pre-beta.
In the dowload area.</edit>

It is split in 3 zip files for easier downloading. Save them all in the same place and unzip the one with .zip extension.

-_- Network discovery
-_- Photo slots are mapped as network devices.
-_- Printing over the network works.
-_- Scanning over the network has been fixed and no more patches should be required

DEVICE SUPPORT: All deskjets, officejets, psc and photosmart printers but the ones listed below.

INSTRUCTIONS:

USB: Run the installer, choose direct connect and connect the printer (power and USB) when prompted. Then:
In the Found New Hardware Wizard do:
1) Select "No, not this time"
2) "Install the software automatically (Recommended)
3) Click "Continue anyway" on the Scary Windows screen.
4) Finally click "Finish"

Network: Make sure the printer is connected to your network. If you need to setup wireless settings do it before install (not recommended unless you like tinny LCD and cell phone keypads) or plug the printer wired to the network first. Wireless check list:

[] MAC address control includes new printers' MAC
[] SID broadcast is temporary enabled (make the whole setup process much easier)
[] The PC is in the same subnetwork as the printer.

Run the installer, choose network and either let the installer discover it (default) or search it by address. If you haven't setup wireless settings and your INTENT is to USE IT wireless choose the wireless path and do your setup. Once the printer is discovered and setup:

In the Found New Hardware Wizard do:
1) Select "No, not this time"
2) "Install the software automatically (Recommended)
3) Click "Continue anyway" on the Scary Windows screen.
4) Finally click "Finish"

SPECIAL THANKS FOR DEBUGGING AND POSTING LOGS TO:
-ardent
-belieal
-jeroenjeremy
-wingrunr21
-geckert
-Snickerdo
-mohan_217
-Trogers
-blibman
-Skyliner34
-Sandy
-and all others that I might have forgoten


PRINTERS NOT SUPPORTED BY THIS DRIVER NOR WINDOWS x64 BUT WITH THE WORKAROUND
hp photosmart series:P1000, P1100, P1115, 1215, 1218, 1315 7550, 7345, 7350, 7150, 130 and 230
hp deskJets series:630, 656, 825
1) Plug the printer on the USB port
2) Click "No, not this time" if prompted to check Windows Update
3) Install the software automatically when it finds "DOT4 USB Printing Support"
4) Select USB Printing support when prompted (not the default DOT4 since it puts an aditional driver in the stack).
5) Click finish
6) After a while a new wizard pops up.
7) No, not this time
8) Install from specific location
9) Don't search, I will choose the driver to install
10) Select Printers
11) Select HP manaufacturer and the following printer from this table:

photosmart 1218, 1315, 7550, 7345, 7350, 7150, 130, 240 use deskjet 990c
photosmart P1000 use deskjet 950c
photosmart P1100 use deskjet 970c

deskjet 630, 656 use deskjet 640C/642C/648C
deskjet 825 use deskjet 845c


12) Ignore the warning and click Yes
13) Installation is done

SUPPORTTED BY WINDOWS x64
hp deskJets series: 630, 640, 656, 816, 825, 840, 845, 920, 930, 940, 950, 955, 957, 970

----------------------



This driver IS NOT SUPPORTED BY HP in any way, form or fashion. This driver is in a PRE-BETA state and it is delivered 'as is'. HP will not assume any responsibility about what might happen to your PC. This driver has not passed WHQL tests so plug and play is fairly slow and you will have to click on some Windows warnings to continue the install.
You are on your own. You might get "voluntary" help in Planet AMD64 > Forum Home > Software > Drivers (http://www.planetamd64.com/index.php?showforum=14)
CAUTION! If you ever call HP support about this driver your 64 bit processor will overclock itself until it burns!

Nice work dude, took me all day but I found a work around for PSC1510 all in one (install 990c drivers) Printer works, trying your scanner fix now
weeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee!


Update!!!
Add HP PSC 1510 all in one to the list !!
It works flawlessly
U a sweet sweet Man!!!!!!!!!!!
Double weeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee!

so i will dl the driver because my printer is a 3600series and i can't get any driver from HP

XMAN,
Any way to get a bundled version. I can't get the file to save renamed using winrar, or winzip. Once I think it is renamed, it doesn't seem to work. Playing with a new 64 bit OS. I have sound and vid working well. No scanner, camera, or printer, or webcam yet.

Update: Managed to get it to work. Seems when I extracted, there was a version 1 in a couple of the titles. After renaming to all the same convention it worked.

Thanks for the assist.

Hi: XRIQAU

Hats off to you and the drivers you have provided I"ve been reading these posts for some time now, and think what you have done is short of a miracle. !!


I am faxing you a 6-pack of your choice as we speak !!!


p.s. is there any chance you might hit the HP Scanjet area ??
I could e-mail you anything, beer, chips, money, my wife :))

oops my processor is starting to overclock and die ....

please please please please hahah------ ok once again Thanks for the work

AWESOME!!!

Thanks a WHOLE BUNCH!

thx for the drivers help ive been looking all over for them :D

Hey,
I'm having trouble getting these to work for the PSC 1510. I know it's not listed as being supported, but can anybody even guess at how to get them to work? I know there's stories of it! Thanks so much!
--Databoy2k

The PSC 1510 belongs to the 1500 Series and is indeed supported by this driver.

Ok, well, whenever I try to install, I go through the normal setup, when it tells me to plug in and turn on my printer, I do so, the Add New Hardware Wizard tries to do it's thing, but every single time it tells me that "Driver Installation Failed" because it could not find the specified file... Can you help with this? Thanks!
--Databoy2k

I think I read though all the replies and I didn't see the HP3650 Deskjet. But I have that printer, and the beta drivers are working great. I haven't had a chance to do any serious color printing but the few I tried looked sharp and crisp. Great Job and thanks for getting these drivers to the public.

I renamed .z01.zip to .z01, and .z02.zip to .z02. I left part 1/3 as .zip. How do I unextract the contents of all three, though? I tried opening the .zip and it said it was corrupted. The same thing happened with .z02. .z01 did work, and under WinRAR the original .zip was extracted but I don't think it was linked to .z01 or .z02.

Bottom line, I have no idea how to do this.

Can someone post instructions on how to extract, please?

Bump

Assuming you downloaded WinZIp 9.0 you just right click on the .zip and choose extract. I just downloaded the files and are not corrupted.

I just did that, and it worked. So through the .zip it knew to look into the .z01 and .z02 files? I cannot open .z01 separately because it claims its corrupted, but I can open .z02 by itself.



Also, I'm going to be installing windows x64 on my laptop at college, so its important that the drivers work so I can get my work done, which is why I'm researching most of it before I take the jump. Everything looks like it'll be fine.

But...does anyone know if the PSC 1410 works?

Drivers for hp 1315 for x64 plis...

How are these beta drivers holding up?