xrigau, hi, I have a problem with this drivers, I install and it works fine when I try to scan, but when I try to print appears a big blue error screen, my printer is HP PSC 1315, and my computer AMD 64 3200+ in a ASROCK mother board.

I put two imagenes of the blue screen

Just installed for my hp psc 2355v all-in-one and it worked beautifully!! thank you !!!

Hi X

Any thoughts about fixing us up with workable scanjet drivers?

Was just wondering if you were kicking it around, or found it to be
not possible. Always keeping an eye on your posts.... praying :)

This is caused by a kernel mode driver that doesn't process the IRPs at the right IRQL. None of the beta drivers is kernel. I sugguest you make sure you update all your kernel mode drivers. You can start disabling all devices that are not essential and see if the problem goes away. Make sure you go to the device manager and set View|Devices by connection. That will show you what devices are enumerated by what bus. In the print pipeline follow USBPRINT.SYS up from the printer devnode.

Hope this helps.

mmm. please run \setup\hpzrcv01.exe and post the ZIP file that will appear in your desktop.

Still kicking it around. No much luck :(

STILL KICKING IT... YES Thank You :)

I have installed these drivers for my printer which is a 5650.

The problem is with word and borders. Even though I have a borderless printer word refuses to accept this and even when I press ignore and it prints anyway some of the document will be missing.

Is there any way to tell word / the driver that my printer is borderless?

Thanks

I installed these drivers when I was using windows x64, but i've recently switched back to 32-bit xp due to difficulties. I'm having a problem getting my computer to uninstall this driver so my PSC 1210 will work again in XP. When I try to install the normal xp driver from HP's website, it gets to 23% installed and fails saying that there's already a newer version of this driver on the computer and the install shuts down. When I try to use the printer, it tells me there is no driver installed and tries to install it.

I've considered reinstalling x64 on my second hard drive, then installing and then uninstalling the x64 beta driver. Would this work? Any other suggestions?

Thanks

Delete ANY references to {25E0F2BA-399C-4cf8-A654-53797016CB77}. They are probably in HKEY_LOCAL_MACHINE\SOFTWARE\Hewlett-Packard\Installed Products and
HKEY_LOCAL_MACHINE\SOFTWARE\Hewlett-Packard\Installed Software

I still don't understand how you "went back" to XP and got part of the registry of the x64 install

If that doesn't work. Delete %temp% folder. Run the x32 hpzsetup.exe with -s and -log 63. Let it fail (-s is silent so no prompts). Then run \setup\hpzrcv01.exe and post the ZIP file on the desktop.

I might be wrong but I think borderless printing on HP printers aplies only to photo media and when printing photos.

Nevertheless, I warned that the drivers are a superset and are not the exact driver for all the models. They are kind of "compatible" drivers. In other words, don't expect perfection YMMV.

Hi to all,

I have a the printer Business Inkjet 1200. I tried to install the printer driver but it seems that it is not included in the driver package from X-MAN. Is any of these drivers compatible and can be used for my printer? Please help.


Thanks a lot
Finipei

Right thanks.

Works fine on 960c printer .

Hi :
I have a 2610 photosmart all-in-one . I downloaded and installed the Hp version 10 drivers . My printer works great . The scanner icon is featured , but there are no drivers to support my scanner . I don't connect to a network. If there is a must for me to do so will someone please confirm this? Otherwise this hasn't helped me at all. Thanks in advance .

THANK YOU SO MUCH xrigau!!!!!!!




My HP 6540 works great. Haven't found any kinks since I got it to work. Had to delete everything remotely related to "printers" and suffer through questions like "Why does it only print Word Docs?" (I never figured out) . Once I noticed how to activate plug and play I was set. Thank you so much



edited to fix the wildly inconsistent spelling due to be wildly thankful.

Hey thanx a lot, worked great with my HP DeskJet 3600 series.

Xrigau, you kick @$$ although unfortunately the installation program is not working for me on Windows 2003 Server x64 R2 Enterprise . Have not tried on Xp64 yet. What happens is right after the screen where it gives me a warning about my OS and it looks like things are going to work, I get a message box saying "The Parameter is incorrect", and when I click ok and the error reporting dialog does it's thing, the details button shows another messagebox with the title "Error Situation Code: 25303864" and the message says:

"The following lines were retrieved from the installation error logs.

Now Launching=X:\hpzshl40.exe -m icepreshield,delayedreboot -l XXX -f X:\Divins??.DAT
Cannot load data failed returning 87 (The parameter is incorrect.
Exit code=87"

(See attached screenshots and error log file)

I have an Officejet 7310 All-In-One as well as an Officejet 7410 All-In-One set up on my office network.
Thank you very much for your work... HP Customer Care directed me to this forum. If you'd like to use me as a guinea pig for my OS let me know.

Hi Strangely enough I heard about this topic and the site from HP (now thats a scarey thought ehhe but I have been trying to find some drivers for a friend for his Cad machine which used to have a Deskhet 1280 connected to it for printing off his work but since he upgraded to 64 bit he can no longer use it which somewhat defeats the point of going 64 bit which is a shame as the program works fine, only thng is now he is having to print off of a very old machine that is having trouble to even load the program.

So question is will the very impressive list of machines covered by your work also work fo the 1280 ??

I'm wondering if it could be because I actually have a drive mapped as X: ... which is used in those parameters?? Is there a way I can change the parameters?

X-MAN...ive got a HP Color laserjet 2840 all in one printer...do u have any x64 drivers for me..it wont install at all

Hey xrigau,

This is an excellent thread, and tool! I work for the U.S. HP Technical Support, your tool has come in handy more than once for WinXP x64 Edition !

I know that HP is supposedly coming out with Basic Print & Scan support in April '06, but this is available now. The most they can do is suggest using a compatible DeskJet or PhotoSmart driver, and your tool is way better!

One question, not to hinder or harass, but any way we could get support for the following new printers?:

- HP PhotoSmart 3210 All-In-One
- HP PhotoSmart 3310 All-In-One
- HP OfficeJet 5610

These are several of HPs latest printers, that have come out in the last few months. They are using the HP CUE 5.3.0b Software Package (if you need to get the printer keys from the drivers ). They happen to be popular units on WinXP x64 Edition, as they are so new !

Thank You for all of your hard work, keep it up !

OH HOLY MR XRIGUA, thank you for this HP driver. it fully works on my psc2110(even in dutch??)

Am I supposed to urar to a certain location? When I try to run hzsetup.exe I get a "System cannot find the file specified" when I run from desktop and "System cannot find path" from my second drive.

BTW I am running x64 XP and I have a Deskjet 3940

Thanks in advance!

re: HP Print drivers
xrigau,May 12 2005, 07:55 PM
I have an HP Photosmart 1115 printer which driver most closely matches this ?
HP still says that they do not intend to support. I want it to do quality color photos. and have it installed on a W2K old pc.

Your assistance wll be much appreciated.

PS. I am running a AMD Athlon 64 x2 4400 on an ASUS motherboard.

Hi

I'm searchin for a Driver for the Photosmart 3310. I asked HP-Support and they gave me this Link. I downloaded the latest driver and tried to install it but it failed several times. (by installing via network it said the operation attempted is not supported, when trying it via USB the printer wasnt realized when plugged in, when windows tried to install it it didn'T find a suitable driver). Is my Printer supported at all? If not when do you think is it possible to get it here? You would do me an great favor by releasing the Driver! At the end Sorry for my English, I'm from Germany. Thanks a lot

TODV

while I congratulate xrigau I think the support shown by HP to say the least is disgusting that don't seem the slightest bit bothered that people who were good customer's and have spent good money on a printer and then find because they have upgraded to 64 bit the printer doesn't work, do they think they can live in the past??

BTW xrigau have you got my PM as I haven't received a answer as yet? and still desperately need drivers for the 1280 its only a fairly standard printer just A3 in size

Using the HP PSC 1410 and the Drivers working 100% thanks for all........now I can enjoy Win XP 64

LOLOLOLOL NOW HP IS COMING TO THE MAN "XRIQAU", AND ASKING FOR SUPPORT.
MAKE SURE THEY BREAK OUT THE CHECKBOOK X, THESE DRIVERS ARE GOLD. I AM GOING TO FAX YOU A TIMECLOCK SO YOU CAN START PUNCHING IN. :)

UNBELIEVABLE..... STILL CAN NOT BELIEVE IT ... READING AGAIN... OMG
GASPING FOR AIR ROLLING ON THE FLOOR

READING THE ABOVE, WOULD LEAD ME TO BELIEVE ANY SUPPORT FOR SCANJETS WILL BE AT LEAST ANOTHER YEAR DOWN THE ROAD. HP HAS DONE A FINE JOB LEADING US ALL TO BELIEVE THEY WOULD BE OUT " SOON " ....FOR 16 MONTHS NOW. AND THEY WILL BE LUCKY IF THEY ARE ABLE TO GET SUPPORT OUT FOR THEIR PRINTERS ANYTIME SOON.

IS IT TIME TO GIVE UP, TOSS THE PRODUCT IN THE TRASH, MOVE ON TO A MICRO SCANNER, THROW IN THE WHITE TOWEL ( WITH HP'S BLOOD ALL OVER IT).

THIS HAS GOT TO BE THE MOST EMBARRASING THING IN THE WORLD. SHAME ON HP FOR POOR SUPPORT, MISLEADING THEIR CUSTOMERS "TELLING LIES" OR AT LEAST PROMISES THEY HAVE YET BEEN ABLE TO KEEP. BUT TO THEN COME OUT AND ASK A THIRD PARTY, TO PROVIDE SUPPORT FOR PRODUCTS THAT ARE BRAND NEW, AND THEY CANT EVEN COME UP WITH A DRIVER TO GET THEM WORKING.

A DRIVER DRIVER DRIVER DRIVER

I APOLOGIZE IF THIS THREAD SEEMS OUT OF PLACE, BUT OBVIOUSLY, THIS IS THE ONLY PLACE THAT WE KNOW PEOPLE FROM HP ACTUALLY COME. SO THIS IS THE BEST PLACE TO PARK THIS THREAD.

THANKS X FOR THE DRIVER AND EFFORT, AND FOR ALL THE PEOPLE YOU HAVE HELPED. WHAT YOU HAVE DONE HERE IS UNREAL AND UNIMAGINEABLE. NOT GOING TO BUG YOU FOR THAT SCANNER DRIVER ANY MORE, AS IT NOW LIES IN MY TRASH. I WOULD NOT EVEN TRY TO SELL IT ON EBAY FOR 1 CENT, TO SOME POOR SOUL WHO WOULD BE STUCK WITH AN HP PRODUCT AND NO SUPPORT. HAVE A WONDERFUL EVENING.. AND TO HP

Well, I figured it out finally. The rar extractor I had (NewzToolz) was corrupting one of the files for some reason. As soon as I downloaded a new extractor (ExtractNow) the files extracted and installed without a hitch. I first installed via USB just to easily get the drivers on my 64 bit, then moved the printer over to my notebook on the wireless network (running XP Home) and everything prints great! Thank you, thank you for this driver and this forum!

Deacon


System:
Windows XP X64 SP1 2003
AMD 64 FX-55
2 GB Kingston Value RAM
2x Gigabyte 6800GT 256MB GPU in SLI mode
2x WD Caviar 80GB SATA HD
Antec NeoHE 550W PSU
Koolance EXOS2 liquid cooling system (not one fan inside my case)<---Highly recommended if you are looking for liquid cooling...does an amazing job

Hi all,

I am back from a long trip. I'll try to catch up with the forum as soon as I can.

Your device is not supported by this release but you can make it work Try the tutorial I plublished here?

Try deskjet 990c if it doesn't work try deskjet 970c, if not try deskjet 950c.
You might install all 3 to the same port.
Hope this helps.

Sorry but these drivers don't support A3 sized printers.

These devices are not supported by this release but you can make them work by reading the tutorial I plublished here

I would recommend any inbox driver that supports HP PCL 6 or HP Postscript
Look in c:\windows\inf\ntprint.inf

Ok, here is my first shot for windows 2003 x64 Server:

open autorun.inf in notepad and search and replace 501_64 for 502_64.
do the same setup\x64scr02.dat

Try again. Let me know if that works, please.

Please run \setup\hpzrcv01.exe and send the zip file that will appear in your desktop.

New version 5.64.0.17


A new release is available here

It only contains bug fixes. The file says 6.64.0.17 but it was a typo it is 5.64.0.17.

xrigau I note your reply but is there any chance that you might produce some drivers for this printer in the near future ??? as HP seem totally uncaring and unhelpful I may have to reinstall the machine in question and go back to a 32 bit OS just so I can use this printer!!

i have problem

when my print finish i have to turn off printer and then back turn on to print on

Thank you so much. I have a HP 7760, which works great. The only issue I have is when printing multiple photos, it always jams. If I print one at a time, it works over and over again with no problem. Multiple text prints work fine. I tried this in VMWare, and I do not run into this problem. I am definatly not complaining here, I am happy to print one photo at a time, as to my alternative of not printing at all.

So, thank you for your hard work, and keep up the good work. Your .17 release is MUCH less buggy as well, very happy to see that, installs have been cumbersome for me in the past, but this one installed on my first try.

Check if the driver has a dry time setting and increase it. That will leave more time to the printer to pick up the next page.

Glad somebody noticed the difference in version 17

Thank for the drivers... I 've looking for a way to use my hp psc1215 device that is connected on an XP x86 machine on my network and this worked like a charm.

I just installed using local usb connection first and then I manually added a new network printer and I provided the \\server\printer name.... Nothing else was needed.

Again, thanks for a job well done.

I have a HP Color Laser Jet 2600, works fine with XP, but not on the x64 platform. Does anyone have a driver for this printer? (CLJ 2600)

I have to say my 12 version has been working so well I did not even see a need for the uprgade.

Hi X-man i dont find any driver in the windows folder...any other suggestions??

Professor X anyway you can implement scanjet support in your drivers ???